# Manual Method King Method - Created by (Bigpack)

**URL:** <https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530>\
**Category:** Instagram Marketing\
**Created:** [September 9, 2019, 6:58pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530 "2019-09-09T18:58:41Z")\
**Posts on this page:** 20\
**Page:** 5

<div class="post-metadata">

**Author:** ![Tyson](https://mpsocial.com/letter_avatar_proxy/v4/letter/t/b4bc9f/32.png) [@Tyson](https://mpsocial.com/u/Tyson)\
**Post date:** [September 10, 2019, 6:24am UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/83 "2019-09-10T06:24:30Z")

</div>

Hey thanks for sharing!! I hope Jv can implement something like this into their software. Automation on native instagram app should be the hardest for instagram to detect!

Does the 6000/30 limit still apply to this method? Have you try going above it ?

---

<div class="post-metadata">

**Author:** ![Drav](https://mpsocial.com/user_avatar/mpsocial.com/drav/32/35148_2.png) [@Drav](https://mpsocial.com/u/Drav)\
**Post date:** [September 10, 2019, 6:52am UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/84 "2019-09-10T06:52:17Z")

</div>

And the test results are?

---

<div class="post-metadata">

**Author:** ![samsam09](https://mpsocial.com/user_avatar/mpsocial.com/samsam09/32/37059_2.png) [@samsam09](https://mpsocial.com/u/samsam09)\
**Post date:** [September 10, 2019, 6:55am UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/85 "2019-09-10T06:55:46Z")

</div>

Great man I just got my Iphone . I will be testing this methode

---

<div class="post-metadata">

**Author:** ![embraceone](https://mpsocial.com/user_avatar/mpsocial.com/embraceone/32/34092_2.png) [@embraceone](https://mpsocial.com/u/embraceone)\
**Post date:** [September 10, 2019, 7:13am UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/86 "2019-09-10T07:13:05Z")

</div>

@bigpack Interesting stuff, thanks for sharing. I urge you to forgive the community and set an example of what you feel should be the approach to situations like these. You were wronged, yes. But now you have an opportunity to show people how it’s done.

@mrsmith surely this exact method can be emulated using the mobile version of a web browser on a PC? That would potentially allow for scaling if you attached a device ID & proxy to separate browser instances.

---

<div class="post-metadata">

**Author:** ![Ryan\_Duck](https://mpsocial.com/user_avatar/mpsocial.com/ryan_duck/32/39496_2.png) [@Ryan\_Duck](https://mpsocial.com/u/Ryan_Duck)\
**Post date:** [September 10, 2019, 7:19am UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/87 "2019-09-10T07:19:49Z")

</div>

Thanks for this, definitely going to try this. Have 3 old iPhones sitting here at home doing nothing. Will try this on one and let you know the results. Thanks for an awesome method and keep up the great work!

---

<div class="post-metadata">

**Author:** ![bigpack](https://mpsocial.com/user_avatar/mpsocial.com/bigpack/32/38518_2.png) [@bigpack](https://mpsocial.com/u/bigpack)\
**Post date:** [September 10, 2019, 8:15am UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/88 "2019-09-10T08:15:54Z")

</div>

NP bro! salute hope it works out for you.

---

<div class="post-metadata">

**Author:** ![Ryan\_Duck](https://mpsocial.com/user_avatar/mpsocial.com/ryan_duck/32/39496_2.png) [@Ryan\_Duck](https://mpsocial.com/u/Ryan_Duck)\
**Post date:** [September 10, 2019, 2:46pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/89 "2019-09-10T14:46:24Z")

</div>

Just tested it and was not difficult at all to setup, got it first try. Put a 10 sec delay on the script between loops and it worked perfectly. Going to buy the upgrade now, but i dont see any problems. Thanks again man!

---

<div class="post-metadata">

**Author:** ![Jay\_Grylls](https://mpsocial.com/user_avatar/mpsocial.com/jay_grylls/32/35263_2.png) [@Jay\_Grylls](https://mpsocial.com/u/Jay_Grylls)\
**Post date:** [September 10, 2019, 3:11pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/90 "2019-09-10T15:11:00Z")

</div>

Smart one  
Be careful with unfollow apps tho, Instagram is giving out Action Blocks when using them

---

<div class="post-metadata">

**Author:** ![Jake\_Lich](https://mpsocial.com/user_avatar/mpsocial.com/jake_lich/32/29266_2.png) [@Jake\_Lich](https://mpsocial.com/u/Jake_Lich)\
**Post date:** [September 10, 2019, 3:13pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/91 "2019-09-10T15:13:11Z")

</div>

Just one question, are you following only one person in each # ? So you go into one tag follow, go out next tag follow and so on until you do every tag than the software repeats itself?

---

<div class="post-metadata">

**Author:** ![bigpack](https://mpsocial.com/user_avatar/mpsocial.com/bigpack/32/38518_2.png) [@bigpack](https://mpsocial.com/u/bigpack)\
**Post date:** [September 10, 2019, 3:57pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/92 "2019-09-10T15:57:59Z")

</div>

Right now I’m working on a lua script that will find the image of the comment, like, and follow button and tap. this will make this method more flawless.

---

<div class="post-metadata">

**Author:** ![bigpack](https://mpsocial.com/user_avatar/mpsocial.com/bigpack/32/38518_2.png) [@bigpack](https://mpsocial.com/u/bigpack)\
**Post date:** [September 10, 2019, 4:00pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/93 "2019-09-10T16:00:02Z")

</div>

Yes following one person from each tag then when it goes back, the loop I created automatically moves to the next tag. Play with it and you’ll see what I’m talking about.

---

<div class="post-metadata">

**Author:** ![hw711](https://mpsocial.com/letter_avatar_proxy/v4/letter/h/3e96dc/32.png) [@hw711](https://mpsocial.com/u/hw711)\
**Post date:** [September 10, 2019, 4:01pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/94 "2019-09-10T16:01:23Z")

</div>

> [@scking](#):
>
> Don’t be fools !  
> Repeating same patterns / scrolling over and over again will get you blocked sooner then you think.  
> the reson this is work is that it is personal phone that already used for long.  
> IG recored every step you do… so even scrolling with same pattern for 10 phones on same subnet will block all at the same time … you need to be uniqe for each phone.

Also because it’s just a replay of a recording, there is no feedback system in place, if the app ends up in a bad state that was not previously handled, you wouldn’t know. For example, if you get a block for some reason and the replay just keeps on following and get another hundred blocks, I don’t think that will be good for the account.

---

<div class="post-metadata">

**Author:** ![bigpack](https://mpsocial.com/user_avatar/mpsocial.com/bigpack/32/38518_2.png) [@bigpack](https://mpsocial.com/u/bigpack)\
**Post date:** [September 10, 2019, 4:38pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/95 "2019-09-10T16:38:48Z")

</div>

Non sense been running this all day and night carry on with the non sense theories and test yourself maybe you would be actually making actions and not running into blocks. How you suggesting things and you haven’t tested?

---

<div class="post-metadata">

**Author:** ![Jake\_Lich](https://mpsocial.com/user_avatar/mpsocial.com/jake_lich/32/29266_2.png) [@Jake\_Lich](https://mpsocial.com/u/Jake_Lich)\
**Post date:** [September 10, 2019, 4:42pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/96 "2019-09-10T16:42:34Z")

</div>

How do you get it to switch accounts? Do you just have it switch accounts after 1 cycle though the tags or do you manually start and stop it whenever you want to switch accounts?

---

<div class="post-metadata">

**Author:** ![hw711](https://mpsocial.com/letter_avatar_proxy/v4/letter/h/3e96dc/32.png) [@hw711](https://mpsocial.com/u/hw711)\
**Post date:** [September 10, 2019, 4:51pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/97 "2019-09-10T16:51:54Z")

</div>

> [@bigpack](#):
>
> Non sense been running this all day and night carry on with the non sense theories and test yourself maybe you would be actually making actions and not running into blocks. How you suggesting things and you haven’t tested?

I have my own android bot that can do customizable actions, I don’t need to test your replayer. lol

---

<div class="post-metadata">

**Author:** ![bigpack](https://mpsocial.com/user_avatar/mpsocial.com/bigpack/32/38518_2.png) [@bigpack](https://mpsocial.com/u/bigpack)\
**Post date:** [September 10, 2019, 4:53pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/98 "2019-09-10T16:53:37Z")

</div>

You can record the action to switch the account after a set of tags is done. after one round of tags, switch the account. Before switching tap the airplane mode on and off and switch back to the next account.

appActivate(" com.burbn.instagram"); is the code to switch back into the app if you want to place this in your code without recording.

---

<div class="post-metadata">

**Author:** ![bigpack](https://mpsocial.com/user_avatar/mpsocial.com/bigpack/32/38518_2.png) [@bigpack](https://mpsocial.com/u/bigpack)\
**Post date:** [September 10, 2019, 4:55pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/99 "2019-09-10T16:55:37Z")

</div>

Ok do the actions, and lay off the negativity. You got your own method, but snooping here looking for trouble? Yea sure buddy!

---

<div class="post-metadata">

**Author:** ![shipfaced2015](https://mpsocial.com/user_avatar/mpsocial.com/shipfaced2015/32/37158_2.png) [@shipfaced2015](https://mpsocial.com/u/shipfaced2015)\
**Post date:** [September 10, 2019, 5:01pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/100 "2019-09-10T17:01:27Z")

</div>

how do you become a level 2 on here? I didn’t even know you had diff levels of stuff we can’t see. I just officially signed up recently. Thanks OP for your post

---

<div class="post-metadata">

**Author:** ![hw711](https://mpsocial.com/letter_avatar_proxy/v4/letter/h/3e96dc/32.png) [@hw711](https://mpsocial.com/u/hw711)\
**Post date:** [September 10, 2019, 5:02pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/101 "2019-09-10T17:02:06Z")

</div>

> [@bigpack](#):
>
> Ok do the actions, and lay off the negativity. You got your own method, but snooping here looking for trouble? Yea sure buddy!

Nobody is looking for trouble. I was just simply pointing out the limitation of a replayer and potential danger of using a method with no feedback system. You are obviously very full of yourself so you have no interest in listening to anyone who may actually know more than you but I’m sure there are plenty other people on the forum who don’t have such a terrible attitude and are interested in what I have to say.

---

<div class="post-metadata">

**Author:** ![embraceone](https://mpsocial.com/user_avatar/mpsocial.com/embraceone/32/34092_2.png) [@embraceone](https://mpsocial.com/u/embraceone)\
**Post date:** [September 10, 2019, 5:03pm UTC](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530/102 "2019-09-10T17:03:53Z")

</div>

Please see these [User Level Requirements](https://mpsocial.com/t/user-levels-explained/792/9).

Welcome to MPSocial!

[Previous page](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530.md?page=4)

[Next page](https://mpsocial.com/t/manual-method-king-method-created-by-bigpack/83530.md?page=6)
