How to use Contextual Actions function - Jarvee Tutorial

To make the Instagram accounts look more human and natural, and to reduce the number of blocks received while using the Jarvee tools, we’ve added an option to change how the Follow, the Unfollow, and the Like tools execute actions. It’s called “Contextual Actions.”

A lot of Jarvee’s users tried the option already, and they reported great results using it. We’ve been improving it in the last few updates, and now it should work smoothly without issues.

If your accounts are executing, follow, unfollow, and like actions without blocks while using the API or the EB, there’s no need to use the option. It’s better to keep using what’s already working for you. Otherwise, this guide is for you.

image
image

The option works when using the option “USE ONLY THE EMBEDDED BROWSER” or using the options to use only the Embedded Browser to Follow, Unfollow, Like and Comment or when using the api with the Enable api emulation option checked in Advanced Profile Settings.

image

Emulating human behavior works well with the “Contextual Actions” option, and should help even more with the blocks.

image
image

You can use the option when running the accounts on the API as well ***** . Make sure the option “Enable api full emulation” is checked in the advanced profile settings. Otherwise, the option wouldn’t work at all, and the tools would execute actions as if the option is unchecked.

You can find more details about it in this guide: Full API emulation guide

image

How does the “Contextual Actions” option work?

To make it easy to follow this guide, we work with examples. We focus on the Follow tool first because the same principle applies to both the Unfollow and Like tools as well. However, the tools execute actions from different contexts.

For the Follow tool:

image

We configured the Follow tool to execute 6 to 12 follows per operation with 20 to 40 seconds delay between each follow. We enabled the “Contextual Actions” and set it to follow 1 to 5 users after each main follow with a delay of 0 to 8 seconds.

You can use any sources you want because the “Contextual Actions” option works with all of them. We used the “followings of Nike” in our example.

image

Behind the scene, the Follow tool picked a random value between 6 and 12, and it was 8 for the particular operation we are about to detail. The users, in order, that the tool extracted from the source used (followings of Nike) to follow them are:

  1. cristiano
  2. kipchogeeliud
  3. k.mbappe
  4. nikebasketball
  5. kingjames
  6. john_john_florence
  7. therealkengriffeyjr
  8. gomofarah

image

Find below a screenshot from the DASHBOARD à Summary tab of the exact operation detailed above:

image

You might notice the sub-option in the “Contextual Actions” of the Follow tool by now, and you are wondering what it does precisely and how it works.

image

As the name of the option suggests, when you check it, the Follow tool would execute the actions only from context. That means when it visits a profile, it won’t follow it then follow from it as a context. Instead, it visits it and follows directly from its context.

The Follow tool picked 7 users to follow this time. The steps we explained in the example above are still the same. Still, instead of following the first user, the tool uses it as a context. It follows from its suggested users’ section and its follower/following list.

image

image

The difference between the “Contextual Actions” option in the Follow tool and Unfollow and Like tool is the context used to execute actions. Also, think of the Unfollow and Like tools as having the option “Do actions only from context” checked by default. All the actions executed using the 2 tools are strictly from context when the option “Contextual Actions” is in use. In what’s following, we explain how the tools execute actions in detail below.

For the Unfollow tool:

image

The tool visits your profile and clicks on the “following” list then it unfollows users from there.

Note that the tool is not unfollowing users randomly. Instead, it unfollows the users based on the settings and filters you configure in the Unfollow tool.

Find below a screenshot from the DASHBOARD à Summary tab of an Unfollow operation while the “Contextual Actions” option is enabled. We configured the tool to execute 6 to 12 unfollows per operation and 1 to 5 contextual actions.

Similar to the Follow tool, when the Unfollow tool started the operation, it picked a random value between 6 and 12, and it was 8. Also, it extracted the users to unfollow then it proceeded to unfollow them in the steps below:

  • It picked a random value of contextual actions between 1 and 5. It was 3;
  • It visited the profile of the account it’s running on, and it clicked on the “following” list;
  • It unfollowed 3 users with random delays of 0 – 8 between each one;
  • It visited the Instagram home feed, then went back to the profile and re-did the first 3 steps again (new random values).

It goes on that way till it unfollows 8 users, then it stops and marks the operation as finished.

Here’s a screenshot of the operation from the DASHBOARD à Summary tab. Each colored rectangle refers to a single “Contextual Actions” operation.

image

For the Like tool:

image

Note that the likes the posts based on the inputs you add to the Sources tab of the Like tool.

The settings are 6 t o12 posts to like per operation with a 15 to 30 seconds of delay between each like, and 1 to 5 contextual actions with a delay of 0 to 8 seconds.

The steps the Like tool executed the actions are:

  • It picked a random value between 6 and 12. It was 7;
  • It picked a random value between 1 and 5 contextual actions. It was 3;
  • It scrolled for some time and liked 3 posts then it stopped;
  • It picked another random value between 1 and 5. It was 3 again, and it re-did step 3 (new random values).

Same as the Unfollow tool, it continues that way till it likes the number of posts it’s supposed to like (7 posts), then it stops and marks the operation as finished.

Find below a screenshot of the operation we described above operation using the “Contextual Actions.” Each rectangle represents a different “Contextual Actions” operation:

image

23 Likes

A lot of the time you get a block on the first follow attempt when the follow tool starts to run. Is there a way for you guys to implement an option where the FIRST follow during a follow cycle is made through contextual actions?

You just have to check the option “do actions only from context” in the follow tool, under “enable contextual actions”.

Very Helpful! thanks guys :heart_eyes:

Who has been testing this for a period of time, and has results ?

I don’t want ALL actions, only the first action

@Adi_Ankonina is doing nice job with it. Check here:

This happens if you previously got blocked for certain amount of time and block didn’t expire yet, or if your proxies are really bad or IP is blacklisted. Also, it could be the link in your bio (if you have one).

2 Likes

@Stiletto Are you going to make contextual actions work for the comment tool?

Suuper helpful, thanks guys :smiley:

Great tutorial, thanks for putting the time for it!

I was able to do more than 100 follow, 160 unfollow and 60 Likes in about 5 hours no blocks so far, so it was really helpful. by the way, the account is not that old and I’m using a scrapper account

1 Like

I’ll check with our developers what can be done, although this option doesn’t really make sense for comment tool :slight_smile:

You’re welcome, hope it well help with the blocks.

No probs, we’re here to help :slight_smile:

Good to hear that. Keep on!

1 Like

Hi @Stiletto is there a way to talk you in private?

Thanks

Hi @sheviii
Welcome to the forum, you can send me PM here or you can contact support through contact form.

@Stiletto Do you recommend having separate accounts for scraping followers and follow from other accounts/DM to be on safe side

2 Likes

I recommand on that yes, it’s more safety for the main acconunt :slight_smile:
and this is a great guide, thank you for sharing that @Stiletto!

1 Like

Is it viable to scrape on other accounts and then do the f/uf etc manually on the main using the scrapes accounts? Wanting to get into Jarvee but weary about getting blocked as I’ve just had a 7 day

this is really a great guide. thank you for sharing! I’ve been using it on my F/U tool and having great results so far. I can’t wait to try it on my like tool

Yes, that’s better. You’ll make less api calls and less actions in general.

Sorry, can’t help you with manual following and unfollowing. With these feature, you shouldn’t get blocks unless you’re too aggressive.

Thanks @Adi_Ankonina :slight_smile:

Thank you @ossi :slight_smile:

guys.are you still getting action blocked / temp hard block using this option? “contextual action”